- Bochs configure how to#
- Bochs configure install#
- Bochs configure zip file#
- Bochs configure download#
Now you just run setup.exe from the win95 cd and if everything goes right you The HD-image and then format it using format c: When you've successfully booted to dos, you could run fdisk to partition If everything goes right you should be booted into DOS. (if you're using a physical one) in the floppy drive and then run the bat file. Make sure you have the win95 cd in the cd-rom drive and the bootdisk \bochs, place theīat file in the same subdir as the images and bochsrc file.Ħ. If you createdĪ subdir, the file just need to loke like this. Now you have to make (or take the one from the bochsrc.zip file)Ī bat file that points to the bochs.exe in your bochs directory. (B:) from where you can load the mouse drivers.ĥ. With the on it, so that you get a second floppy drive inside the emulator Status=inserted" in the bochsrc file to the name of the image of the disk Edit the "b.img" in the line "#floppyb: 1_44= b.img, On a floppy and use rawwritewin to make it a floppyimage, put the image in the You should also put the file included in this file To "floppya: 1_44=a.img, status=inserted" (if your floppyimage's name You should change the line: "floppya: 1_44=\\.\a:, status=inserted" Image, hopefully :-P ) and change the c.img if you named your hard-disk imageĪlso, if you're going to boot from a floppyimage instead of a physical floppy, Line to the correct ones for your image (you wrote it down when you made the The "diskc: file=c.img, cyl=xxx, heads=xx, spt=xx" Then you have to change the cyl, heads and spt (sectors per track) values in , status=inserted" to the drive letter of your CD-ROM drive. You must change the "h:" in the line "cdromd: dev=\\.\ h: You want to modify it yourself, the file bochsrc-sample.txt in your bochs directory Included is a modified version of the bochsrc file for the small linux distro The bochsrc file have to be in the same subdir as the images.
Bochs configure zip file#
I have uploaded a zip file here,Ĭontaining my bochsrc and a bat file that I'm going to talk about further on Move the created floppy image to the subfolderĤ. Put a bootdisk into the floppydrive, name the image (example: a.img) and push Use a floppy disk image (for some odd reason), you can now use the rawwritewin.exe If youĪre going to use a physical disk you can go to number 4 now. The CD-ROM drivers, I used the win98 bootdisk, and it worked very good. You can use any bootdisk that boots into dos and loads
You can use a physical bootdisk with bochs (easier), When the image is ready, move the file to the subfolder. The cyl, heads and sectors per track are important so you'd better write You probably want some room for apps too.
Bochs configure install#
The normal install of windows 95 is about 80Mb and Now you can use the program called bximage.exe Make a subdirectory (it doesn't have to be a subdir, it can probablyīe anywhere) in the bochs directory, for example "win95".ģ. I also used the Rawwrite, which is often used to make bootdisksįor linux installations.
Bochs configure download#
Download Bochs for Windows from Īnd unzip it. Have to find another solution like making a diskimage of the CD (which isn'tġ. (1.2.1) version (when this was written) does not support physical CD-ROM orįloppy access under Windows 9x/ME, so if you're using one of those systems you'll Also this was tested on a Windows 2000 machine, and in the current You will need the Windows 95 install CD in order to fully use this There are many ways to install it but I describe
Bochs configure how to#
2001) In this tutorial I will try to describe how to set up Windows 95 in the Windows How to install Windows 95 in Bochs Setting up Bochs (win32 version) to run Windows 95 (updated 28 aug.
0 kommentar(er)
